Big Foot 4-Wheel and 6-Wheel
PWC Beach Dolly

This is the ultimate cart for all PWC’s. It will handle up to 1000 lbs. The four jumbo 21″x12″ tires work to float the weight over the softest of surfaces. This cart rides level to facilitate movement of the heavier PWC. It comes standard with a powerful 1200lb. capacity winch. Aircraft grade aluminum, welded frames, and stainless axles. The skid rails are over 2″ in diameter and covered with marine carpeting to best protect your hull.
Tires: 21″x12″ Jumbo Chevron V Groove low pressure tires
Rims: Injection molded nylon composite 1″ diameter hub
Axle: 1″ stainless steel tubing
Frame: Welded aircraft grade aluminum
Bow Stop: Stoltz clear polyurethane
Winch: 1200lb. capacity 49:1 gear ratio with ratcheting stop
Hardware: Stainless steel screws, bolts, quick pins
Support Rails: 2″ diameter pipe covered with PVC & Polyolefin carpet
Width: 46″ to outside of tires
Height: 22″ to top of support rails (trailer height)
Length: 9′
Weight: 90lb.


Bigfoot 6-Wheel – Best Beach Dolly on the Market
Why make a 6 wheel beach dolly? Because the continued escalation in horsepower wars by the PWC manufacturers has continued to add weight and length to some of the new watercraft coming into the market. This Bigfoot addresses the needs of those who feel they need the extra capability that 6 wheels bring to bear. It has a whopping 1500lb.  of weight carrying capacity. It will accommodate any watercraft being made with ease. Also, it will accept smaller outboard-equipped boats, such as RIB inflatables or similar skiff-type hulls. It has the same rugged construction as the rest of our Bigfoot lineup. The support rails are 6’ long and the overall length is 10’. Same 21” balloon tires. The optional ATV coupler would be recommended. 170 lbs. overall weight.

Standard Big Foot Features & Specifications
21” diameter by 12” wide balloon tire is standard. Rolls easily over any surface. 2 ply tubeless design. Aircraft grade aluminum alloy with 1” stainless axle and hardware for strength and corrosion protection. Welded framework and supports resulting in superior strength. Rugged, durable yet lightweight construction. 2” angled support rails are covered with a hard but slick UHMW to best protect the hull. Makes loading the PWC easy. Fully adjustable Stoltz polyethylene bow support. 1200 lb. capacity galvanized winch. Replaceable nylon wheel bushings or optional heavy-duty composite material with lubricating properties. Optional ATV coupler kit for low-speed towing. Available for 1 7/8” or 2” ball.
Made in America, not imported.


4-Wheel Beach Dolly $1,495.00 plus shipping

6-Wheel Beach Dolly $1,795.00 plus shipping

Wheelez 6-Wheel PWC Beach Dolly

6-Wheel PWC Beach Dolly


  • Six Detachable 49 cm unique beach wheels.
  • Winch for easy loading and unloading.
  • Stainless Steel hardware.
  • Plastic-covered runners to protect your boat hull.
  • Optional ATV Hitch Kit allows you to tow at low speeds with an ATV.


  • Payload capacity: 1210 lbs (550 kg)
  • Weight: 141 lbs (64 kg)
  • Dimensions: 67.5L x 45W x 19”H
    (172 x 114 x 48.3 cm)
  • Balloon Wheels: 19.3 x 9″ (49 x 23 cm)
  • Materials: Anodized aluminum frame.
    Marine-grade stainless steel hardware.

The PWC Dolly 36 handles larger Jet Ski or PWC. The PWC Dolly 36 has a quick, easy assembly with common hand tools. The PWC Dolly 36 has 3 axles and 6 balloon wheels and will hold most three-seat PWCs or Jet Skis. Optional Hitch Kit attaches to Winch Kit for easy towing behind your ATV.

Cost: 6-Wheel $1,795.00 plus shipping

For information and ordering, contact:

Eric Akiskalian / Owner
(805) 443-2045

We also accept cashier checks, checks, and wire transfers.

All qualified returns are subject to shipping and restocking fees.

“Keep The Dream Alive!”