WE OFFER CUSTOM INSTALL SERVICES FOR ALL RESCUE GEAR, TRACTION PADS, AND BUMPERS. PLEASE CALL ERIC DIRECT AT 805-443-2045 FOR  DETAILS. SERVICING CA, OR AND WA AREA CUSTOMERS.

 



 

PWC + Boating 37″x 49″ 2-Tone Cut Waffle
Part Number: SHT37CW2T
2-Tone sheets of 1/4″ (6mm) Hydro-Turf with Cut Waffle. We start with a sheet that is 40″ x 62″, but must trim down as we can only groove a maximum of 49″ and some of the color around the edges may be inconsistent. Usable area is approximately 37″x 49″. We will include additional cut off a piece if available. Add 3M self-adhesive for $30.
Price: $114.00

PWC + Boating 37″x 58″ 2-Tone Cut Diamond
Part Number: SHT37CD2T
2-Tone sheets of 1/4″ (5.5mm) Hydro-Turf with Cut Diamond. Actual sheet size will be 40″ x 62″, but some of the color around the edges may be inconsistent. Usable area is approximately 37″x 58″. Shown in Black on Gray. Add 3M self-adhesive for $30.
Price: $109.00

PWC + Boating 40″x 49″ Cut Waffle
Part Number: SHT40CW
A sheet of Hydro-Turf in our 1/4″ (6mm) thick Cut Waffle pattern. Available in all our solid, camo and marble colors. Sheets may have some small holes. This is a natural occurrence in EVA material. Add 3M self-adhesive for $30.
Price: $94.00

 
PWC + Boating 47″ x 86″ Cut Groove
Part Number: SHT86CG
Large sheet of Hydro-Turf 1/4″ (6mm) with Cut Groove. Grooves run the 86″ length. Available in limited colors. Swamp Camo is out of stock until the end of July. We do, however, have Swamp Camo available in “B” Stock on our Closeout and Specials section. Add 3M self-adhesive for $40. This provides a strong, fast & clean application to fiberglass, gel coat, and metal surfaces. Let us know if you will be applying this to plastic, so we can use an adhesive specifically for that. Unable to ship internationally due to size restrictions.
Price: $119.00

PWC + Boating 40″x 62″ Cut Groove
Part Number: SHT40CG
A sheet of 1/4″ (6mm) Cut Groove Hydro-Turf. Available in all our colors. Sheets may have some small holes. This is a natural occurrence in EVA material. Add 3M self-adhesive for $30.
Price: $89.00

PWC + Boating 40″x 62″ Cut Diamond
Part Number: SHT40CD
Sheet of 1/4″ (6mm) Diamond Grooved Hydro-Turf. Available in all our colors. Sheets may have some small holes. This is a natural occurrence in EVA material. Add 3M self-adhesive for $30.
Price $89.00

 
PWC + Boating 37″x 58″ Molded Diamond
Part Number: SHT40MD
Our most aggressive and durable material. Sheets have some holes and variation in the surface appearance. These are natural occurrences in molded EVA sheets. Sheet size can vary from 37″x 58″ to 40″x 62″. Available in Black, Gray & Dk. Gray. Add 3M self-adhesive for $30.
Price: $89.00

Additional products available:
160z can of Dap Weldwood Adhesive Glue item no. MSCCC20 Cost: $14.95
2 Inch Glue Brush item no. MSCBR02 Cost: $1.95
MOLDED DIAMOND:
Molded Diamond sheets are only stocked in Black, Gray, and Dk Gray.    37″x 58″ is the minimum usable area of a sheet, but is normally closer to 40″ x 62″. These sheets may have some variation in shape and have small voids or bubbles in the material. This is considered normal with molded sheets.
37″x 58″ and 40″x 62″   grooves:
Cut Groove – (Straight lines) Grooves run length of sheet.
Cut Diamond – Diamonds are 2″ long and run the length of the sheet.
Cut Waffle – Size is limited to maximum 49″, so sheets must be blocked. We will process and include an extra piece of material if possible.
Flat -Standard Brushing
47″x 86″ Available grooves:
Cut Groove – (Straight lines) Grooves run the length of sheet.
Cut Diamond – AKA “Long Diamond” because Diamonds are over 12″ long and run the length of the sheet.
Flat – Heavy aggressive brushed top surface.
23″x 86″ Available grooves:
Cut Groove – (Straight lines) Grooves run the length of sheet.
Cut Diamond – AKA “Small Diamond” because Diamonds are only 1.25″ long and run the length of the sheet.
Flat – Heavy aggressive brushed top surface.
Sheets can only be safely sanded to a minimum thickness of 3mm at our Anaheim facility.   Sheets can be special ordered 2mm-50mm thick without incurring a sanding charge.   Lead time on special orders is 8-10 weeks and minimums may apply.   A 50% deposit is required for special orders.
For information and ordering, contact:

Eric Akiskalian / Owner
Email: [email protected]
(805) 443-2045

We also accept cashier checks, checks, and wire transfers.

All qualified returns are subject to shipping and restocking fees.

“Keep The Dream Alive!”

Comments